Sponsor Links
How to Optimise the Speed of the Ball Mill
The speed of a Ball Mill is in measured in revolutions per minute (rpm) of its drum.To measure this, you need a stopwatch (preferably that rings!) and a thick felt pen. Mark a bold line lengthwise on the outside of the drum. Then start the loaded ball mill and allow it to reach its steady loaded speed. Then press the stopwatch timed for a minute, and count the number of times the bold line comes into view before the stopwatch rings.
The speed of rotation (rpm) of the loaded ball mill is critical to success:too slow, and the milling takes too long; while too fast, and the contents (balls, ore and water) slam against the wall, inhibiting milling.Now use trial-and-error to discover the critical speed at which the centrifugal force pins the balls against the inside of the drum - they cease to roll and no longer fall. For this, the ball mill should be fitted with a variable speed drive.
The critical speed can also be derived by 42.3/D0.5 where D is the diameter in METRES. For instance, a 90cm diameter ball mill has a critical speed of 44 rpm. For efficient milling, the critical speed is too high - you need now to determine the optimal speed which is about 70-75% of the critical speed. For instance a 90cm diameter ball mill with a critical speed of 44 rpm has an optimal speed of 31 to 33 rpm. Get rotary kiln,ball mill,Mineral Processing From http://www.ballmill8.com
The speed of a Ball Mill is in measured in revolutions per minute (rpm) of its drum.To measure this, you need a stopwatch (preferably that rings!) and a thick felt pen. Mark a bold line lengthwise on the outside of the drum. Then start the loaded ball mill and allow it to reach its steady loaded speed. Then press the stopwatch timed for a minute, and count the number of times the bold line comes into view before the stopwatch rings.
The speed of rotation (rpm) of the loaded ball mill is critical to success:too slow, and the milling takes too long; while too fast, and the contents (balls, ore and water) slam against the wall, inhibiting milling.Now use trial-and-error to discover the critical speed at which the centrifugal force pins the balls against the inside of the drum - they cease to roll and no longer fall. For this, the ball mill should be fitted with a variable speed drive.
The critical speed can also be derived by 42.3/D0.5 where D is the diameter in METRES. For instance, a 90cm diameter ball mill has a critical speed of 44 rpm. For efficient milling, the critical speed is too high - you need now to determine the optimal speed which is about 70-75% of the critical speed. For instance a 90cm diameter ball mill with a critical speed of 44 rpm has an optimal speed of 31 to 33 rpm. Get rotary kiln,ball mill,Mineral Processing From http://www.ballmill8.com
The speed of a Ball Mill is in measured in revolutions per minute (rpm) of its drum.To measure this, you need a stopwatch (preferably that rings!) and a thick felt pen. Mark a bold line lengthwise on the outside of the drum. Then start the loaded ball mill and allow it to reach its steady loaded speed. Then press the stopwatch timed for a minute, and count the number of times the bold line comes into view before the stopwatch rings.
The speed of rotation (rpm) of the loaded ball mill is critical to success:too slow, and the milling takes too long; while too fast, and the contents (balls, ore and water) slam against the wall, inhibiting milling.Now use trial-and-error to discover the critical speed at which the centrifugal force pins the balls against the inside of the drum - they cease to roll and no longer fall. For this, the ball mill should be fitted with a variable speed drive.
The critical speed can also be derived by 42.3/D0.5 where D is the diameter in METRES. For instance, a 90cm diameter ball mill has a critical speed of 44 rpm. For efficient milling, the critical speed is too high - you need now to determine the optimal speed which is about 70-75% of the critical speed. For instance a 90cm diameter ball mill with a critical speed of 44 rpm has an optimal speed of 31 to 33 rpm. Get rotary kiln,ball mill,Mineral Processing From http://www.ballmill8.com
---
Keywords: rotary kiln, ball mill, Mineral Processing
By: ballmill
Free Article Directory: http://www.jumparticles.com
Copy and Paste Link Code:
Article ID 1004736
This article has been viewed 1185 times
SPONSORS
FEATURE SPONSOR
You can now Buy Cancer Drugs like Lenvima (generic version Lenvatinib), Imbruvica (generic version Ibrutinib) at deep discounts due to the Generic Program. Brain boosting drugs like Provigil (generic version Modafinil) and Nuvigil (generic version Armodafinil) are also available at discounted prices.